<img height="1" width="1" style="display:none;" alt="" src="https://dc.ads.linkedin.com/collect/?pid=85560&amp;fmt=gif">
linde_gr_208x104138_170177.png
3510_0218_NPE_landingpage_banner_1024x240.jpg

Reduce weight, cycle times and clean parts with  Innovative New Technologies

 

Novel gas- based solutions for for Plastics Manufacturers to be unveiled at NPE 2018: The Plastics Show

 

For Complimentary Show Registration, click here

 

PLASTINUM® and CRYOCLEAN® solutions from Linde,  tailored for the plastic´s market will support your operation – from gas injection molding through foaming, temperature control to cleaning.

 

Will you be there? If so, we hope you'll join us at our booth to learn more about how our plastics technologies can reduce cycle times, and part weight up 30% or more.

 

Not visiting NPE and want more info? Fill out the form below and we'll get you the answers you need.

 

Here is a quick overview of our plastics solutions featured at NPE:

 

 

NEW! PLASTINUM®  FOAM Injection Molding

Reduce weight with a physical foam process that requires no changes to your injection molding machines

 

The patent pending PLASTINUM®  FOAM Injection Molding from Linde is a new physical foaming process, that offers a less expensive, more flexible solution than currently available technology.  It was developed to address the growing light-weighting trend in automotive and other related industries, as well as the need to reduce raw material costs. PLASTINUM FOAM Injection Molding video It can be used with several machines simultaneously, is and requires no change to your injection molding machines.

 

 

PLASTINUM® GAIM CO2 (eGAIM)
Reduce cycle times 20-50% over standard  Gas Assist Injection Molding using carbon dioxide

Typical Gas Assist processes utilize nitrogen to create hollow parts, like automotive or appliance handles.  Linde has invented a process in which nitrogen is replaced with carbon dioxide (CO2), greatly reducing cycle times. Cooling cycles can often be reduced by more than 50% compared to cycles using nitrogen and overall cycles can often be reduced by 20% - 50%. The cooling effect of high pressure CO2 is comparable to that of water in Water Assist Injection Molding (WAIM), without many of the difficulties inherent to WAIM. 


PLASTINUM®  TEMP S CO2  Spot Mold Cooling

Reduce Cycle times and eliminate sink marks - cooling cores as thin as .025"

 

See a demonstration in the Linde booth at NPE to learn more about this precisely engineered carbon dioxide (CO2)  spot-cooling system that  can reduce cycle times and eliminate sink marks without major modifications. It helps achieve more uniform cooling across the part geometry, cooling cores as thin as .025". 

 

 

CRYOCLEAN® Snow CO2 Cleaning
One step automated cleaning process, with no drying required.  Shortens paint lines.

 

This solvent-free cleaning process is ideal for preparing parts and components prior to painting or coating. Inert Carbon dioxide (CO2) is inert has no ozone-depleting solvents, and no potential for oxidizing metal as with aqueous-based cleaning systems.   Watch video below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Need more information now about the new plastics technologies and can't wait until NPE?    No problem! Fill out the form below and we will get you the information you need.

 

 

Learn More About Linde Plastics Technology

npe2018Capture.jpg
_MG_7604 vor weiß.jpg
Car Light Surround.jpg
GettyImages-165982618_111575.jpg